Scroll down or click a section in the table below to see the systems that we’ll exhibit in our booth during drupa.

① Plow Fold Book Production System

OUR NEW BBS-56 BOOK BLOCK MAKING SYSTEM IS INTEGRATED INLINE WITH OUR SMART BINDING SYSTEM FOR SHORT- TO MEDIUM-RUN BOOK PRODUCTION IN ONE PASS FROM A CONTINUOUS FEED ROLL.

② Cut and Stack Smart Binding System

THIS ROLL-TO-BOOK SOLUTION FEATURES OUR PERFECT BINDER EQUIPPED WITH A LBF-500 LOOSE SHEET BOOK BLOCK FEEDER TO ACHIEVE INLINE INTEGRATION WITH HUNKELER CUT AND STACK TECHNOLOGY.
In Collaboration with Hunkeler

③ Inline Cut Sheet Press &
Robotic Arm Book Production System  

THIS SYSTEM FEATURES TWO RICOH PRESSES AND A ROBOTIC ARM INTEGRATED INLINE WITH FINISHING DEVICES TO ACCOMPLISH A4 OR A5 FORMAT BOOK PRODUCTION FROM BLANK A3 SHEETS IN A SINGLE PASS.
In Collaboration with RICOH and OMRON

④ iCE BINDER BQ-300

THE BQ-300 IS A FULLY-AUTOMATED SINGLE CLAMP PERFECT BINDER DESIGNED FOR EASE-OF-USE, BOOK QUALITY, AND PRODUCTION EFFICIENCY THAT CAN HANDLE VARIABLE THICKNESS PRODUCTION OF UP TO 500 CYCLES PER HOUR.

⑤ iCE STITCHER SPF-2000

THE SPF-2000/FC-2000 IS A BOOKLET-MAKING SYSTEM FEATURING EASE-OF-USE, SUPERIOR QUALITY, AND NEXT LEVEL AUTOMATION THAT CAN PRODUCE BOOKLETS AT A RATE OF UP TO 4,700 CYCLES/HR.

⑥ iCE STITCHLINER Mark V

THIS ROLL-TO-BOOKLET SADDLESTITCHER IS CAPABLE OF VARIABLE THICKNESS STITCHING WITH NO MAKEREADIES AT SPEEDS OF UP TO 6,000 CYCLES PER HOUR. THE DRUPA SYSTEM FEATURES OUR NEW HSF-50 HIGH SPEED SHEET FEEDER.
In Collaboration with Hunkeler

⑱ Workflow Zone

SEE HOW ICE LINK, OUR CLOUD-BASED POSTPRESS MANAGEMENT SYSTEM, CAN BE UTILIZED TO STREAMLINE YOUR WORKFLOW AND INCREASE PRODUCTIVITY BY INTEGRATING/MANAGING MIS, PREPRESS, POSTPRESS, AGVS, AND ROBOTICS.
In Collaboration with ONEVISION, RICOH, SPENCERMETRIX,TESSITURA, and ULTIMATE TECHNOGRAPHICS

⑦ Inline Cut Sheet Press & Cut Sheet Processing System

THIS PRINT-TO-FINISH SYSTEM FEATURES A FUJIFILM CUT SHEET PRESS INTEGRATED INLINE WITH OUR SMARTSLITTER FOR HANDS-OFF PRODUCTION OF GREETING CARDS, BUSINESS CARDS, COVER SHEETS, AND MORE IN A SINGLE PASS.
In Collaboration with FUJIFILM 

⑧ Robotic Arm POD Book System

THIS BOOK PRODUCTION SOLUTION FEATURES THE TECNAU/CANON BOOKREADY SYSTEM INTEGRATED WITH OUR ROBOTIC ARM FINISHING SYSTEM TO MAKE END-TO-END POD BOOK PRODUCTION A REALITY. OUR NEW ICE BINDER BQ-300 IS INTEGRATED WITH A ROBOTIC ARM AND INLINE HT-300 TRIMMER, ALLOWING USERS TO PRODUCE FINISHED BOOKS FROM BLANK SHEETS IN A SINGLE PASS
In Collaboration with TECNAU, CANON, and OMRON

⑨ Flap Cover Making System

THIS SYSTEM EFFICIENTLY CREATES FLAP COVERS THAT CAN BE USED WITH HORIZON PERFECT BINDERS. WHILE IT IS THE FIRST TIME BEING SHOWN, IT’S MADE UP OF RELEASED PRODUCTS AND CAN BE ORDERED ANYTIME AS A CUSTOM SOLUTION.
Made with CRA-36, T-564, PST-44, and Gluing Device 

⑩ Case Bind Book Block Production System

HYBRID SYSTEM FOR SHORT- TO MEDIUM-RUN PRODUCTION OF BOTH SOFTCOVER BOOKS AND HARDCOVER BOOK BLOCKS WITH OUR ENDSHEET AND GAUZE APPLICATORS.

⑪ MiniCABS

INLINE BOOK PRODUCTION SYSTEM FOR SHORT- TO MEDIUM-RUN JOBS IN OFFSET PRINTING WORKFLOWS. PALLETIZED SIGNATURES WILL BE TRANSPORTED FROM B1 FOLDER VIA AGV. DRUPA MINICABS SYSTEM BQ-500 WILL FEATURE A MULTI-BIN COVER FEEDER AS A TECHNOLOGY SHOWING.

⑫ B1 Folder & Palletizing Robot

THIS SHEET-TO-SIGNATURE SOLUTION FEATURES A ROBOTIC ARM TO AUTOMATICALLY PALLETIZE STACKED SIGNATURES AND AN AGV FOR A MORE STREAMLINED OFFSET PRINT WORKFLOW. FOR DRUPA WE HAVE INTEGRATED KONICA MINOLTA’S FORXAI SKELETON IMAGING TECHNOLOGY FOR ENHANCED SAFETY AROUND THE PALLETIZER ROBOT.
In Collaboration with FANUC and KONICA MINOLTA 

⑬ iCE STITCHLINER Mark IV

SHEET-TO-BOOKLET SADDLESTITCHER COMBINING THE EFFICIENCY OF FLAT SHEET COLLATING WITH THE PRODUCTIVITY, VERSATILITY, AND QUALITY OF OUR BOOKLET MAKING TECHNOLOGY. DRUPA CONFIGURATION FEATURES INLINE INTEGRATION WITH PALAMIDES STACKING TECHNOLOGY FOR A MORE STREAMLINED PRODUCTION WORKFLOW. ADDITIONALLY, WITH DAC ENGINEERING’S GORIKA VISION TECHNOLOGY WE ARE ABLE TO MONITOR AND LOG OPERATOR WORKING PATTERNS FOR ANALYSIS AND IMPROVED PRODUCTIVITY.
 In Collaboration with PALAMIDES and DAC ENGINEERING

⑭ RD-N4055DM Rotary Die Cutting System

THIS HIGHLY EFFICIENT SYSTEM STREAMLINES CUTTING, WASTE SEPARATION, AND STACKING IN A SINGLE PASS WHILE MAINTAINING HIGH SPEED PRODUCTION OF UP TO 6,000 CYCLES PER HOUR. NEW GATHERING STACKER UNIT GST-50RD GATHERS MULTIPLE STACKS TOGETHER AND DELIVERS THEM IN A SINGLE PILE FOR CONVENIENT HANDLING.

⑮ iCE FOLDER AFV-566FKT

OUR FLAGSHIP B2-FORMAT CROSS FOLDER THAT IS SECOND TO NONE FOR AUTOMATION AND USER FRIENDLINESS. DRUPA SYSTEM FEATURES AI-INTEGRATION (TECHNOLOGY SHOWING WITH SCREEN) TO ENHANCE THE AUTOMATION EVEN FURTHER.
In Collaboration with SCREEN 

⑯ AF-408F Small Format Buckle Folder

THIS FOLDER IS DESIGNED FOR SMALL-FORMAT APPLICATIONS LIKE PHARMACEUTICAL OR INSTRUCTION MANUALS WHILE MAINTAINING HIGHLY AUTOMATED FEATURES TO MINIMIZE SETUP AND CHANGEOVER TIMES. DRUPA CONFIGURATION INCLUDES INLINE WATER-SCORING, PRESSING, AND TAPING UNITS FOR ENHANCED QUALITY AND HANDLING.

⑰ CRF-362 Creaser and Folder

POWERFUL YET COMPACT SOLUTION CREASES AND FOLDS A WIDE VARIETY OF SUBSTRATES AT HIGH SPEEDS OF UP TO 4,500 CYCLES/HR.